|
|
| |
 |
|
| |
26dbm Wireless Outdoor Multi-Client Bridge/AP/ WDS-NOC-3220
* Product Description : |
 |
The Outdoor Wireless Multi-Client Bridge/Access Point/ WDS (wireless distribution system) operates seamlessly in the 2.4 GHz frequency spectrum supporting the 802.11b (2.4GHz, 11Mbps) and the newer, faster 802.11g (2.4GHz, 54Mbps) wireless standards. It's the best way to add wireless capability to your existing wired network, or to add bandwidth to your wireless installation.
To protect your wireless connectivity, it can encrypt all wireless transmissions through 64/128-bit WEP data encryption and also supports WPA. The MAC address filter lets you select exactly which stations should have access to your network. With the Wireless Multi-Client Bridge/Access Point/WDS, you'll experience the best wireless connectivity available today.
|
|
|
|
|
|
* Product Features :
|
| Features |
Benefits |
| High Speed Data Rate Up to 54Mbps |
Capable of handling heavy data payloads such as MPEG video streaming |
| High Output Power up to 26 dBm |
Excellent output power spreads the operation distance |
| IEEE 802.11b/g Compliant |
Fully Interoperable with IEEE 802.11b/IEEE802.11g compliant devices |
| Point-to-point, Point-to-multipoint Wireless Connectivity |
Let users transfer data between two buildings or multiple buildings |
| WPA/ IEEE 802.1x Authenticator support |
Powerful data security |
| WDS (Wireless Distribution System) |
Make wireless AP and Bridge mode simultaneously as a wireless repeater |
| Watertight and Weatherproof |
Avoid water invaded and weather corroded |
| Wide temperature range and robust mechanical design |
Delivers reliable, top performance in the most demanding environments |
| Power-over-Ethernet (IEEE802.3af Compliant) |
Flexible Access Point locations and cost savings |
|
| |
|
|
| |
|
| Data Rates |
1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps
|
| Standards |
IEEE802.11b/g, IEEE802.1x, IEEE802.3, IEEE802.3u |
| Compatibility |
IEEE 802.11g/ IEEE 802.11b |
| Power Requirements |
Active Ethernet (Power over Ethernet) -48 VDC/0.7A
External Unit: Auto sensing 100/240 VAC; 50/60 Hz |
| Surge Arrester (Option) |
20KA Surge Current |
| Regulation Certifications |
FCC Part 15/UL, ETSI 300/328/CE |
| RF Information |
|
| Frequency Band |
2.400~2.484 GHz |
| Media Access Protocol |
Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA) |
| Modulation Technology |
Orthogonal Frequency Division Multiplexing (OFDM)
DBPSK @ 1Mbps
DQPSK @2Mbps
CCK @ 5.5 & 11Mbps
BPSK @ 6 and 9 Mbps
QPSK @ 12 and 18 Mbps
16-QAM @ 24 and 36 Mbps
64-QAM @ 48 and 54 Mbps |
| Operating Channels |
11 for North America, 14 for Japan, 13 for Europe, |
Available transmit power
(Typical) |
25dBm Min. @1, 2, 5.5 and 11Mbps
23dBm Min. @6, 9, 12, 18Mbps
22dBm Min. @24, 36Mbps
21dBm Min. @48, 54Mbps |
| RF Connector |
SMA Type (Fr)-Optional |
| Networking |
|
| Topology |
Ad-Hoc, Infrastructure |
| Operation Mode |
Point-to-Point/ Point-to-Multipoint Bridge/ AP/ Client Bridge/ WDS |
| Interface |
One 10/100Mbps RJ-45 LAN Port |
| Security |
IEEE802.1x authenticator / RADIUS client (EAP-MD5/TLS/TTLS) support in AP mode
WPA2/WPA/ Pre Share KEY (PSK)/ TKIP/ AES
MAC address filtering
Hide SSID in beacons |
| IP Auto-configuration |
DHCP client/server |
| Management |
|
| Configuration |
Web-based configuration (HTTP)
Telnet configuration
SNMP V1(MIBI, MIBII) |
| Firmware Upgrade |
Upgrade firmware via web-browser
Serial Interface (RS-232)
TFTP
|
| Physical |
|
| Dimensions |
163.8(L)mm * 135.2(W)mm * 47.0(H)mm |
| Weight |
1.2 Kg (2.6 lbs) |
| Environmental |
|
| Temperature Range |
Operating: -20C to 60C (-4F to 140F)
Storage: -40C to 80C (-40F to 176F)
|
| Humidity (non-condensing) |
5%~95% Typical |
|
| |
|
| |
|
|
| |
